Dussack Drills 1

From Scholar Victoria
(Difference between revisions)
Jump to: navigation, search
(Created page with "'''The First Drill, teaching how to send each of the four cuts through its line; firstly halfway, that is into the Longpoint, secondly all the way through the line, cut after ...")
 
m (Cutting to Longpoint Drill)
 
(One intermediate revision by one user not shown)
Line 1: Line 1:
'''The First Drill, teaching how to send each of the four cuts through its line; firstly halfway, that is into the Longpoint, secondly all the way through the line, cut after cut from one side.'''
+
This first Drill teaches how to send each of the four cuts through its line; firstly halfway, that is into the Longpoint, secondly all the way through the line, cut after cut from one side.
  
Stand with your left foot forward and hold your dusack in the Steer, as shown by the large figure on the left in the previous image [B].  
+
== Cutting to Longpoint Drill ==
 +
 
 +
This shows how you can parry your opponent's cuts into longpoint.
 +
 
 +
Stand with your left foot forward and hold your dusack in the Steer, as shown below.
  
 
[[File:DussackStierGuard.jpg|300px|center]]
 
[[File:DussackStierGuard.jpg|300px|center]]
  
Step and cut straight from above down through the vertical line, as far as the Midpoint where the lines cross over each other; thus you stand with your arm extended in the Longpoint, concerning which see the large figure also on the left in the image on the following page [C].  
+
* Step and cut straight from above down through the vertical line, as far as the Midpoint, so that you're in longpoint (as shown below).
  
 
[[File:DussackLangort.jpg|300px|center]]
 
[[File:DussackLangort.jpg|300px|center]]
  
From there, let the foible of your dusack drop and run off toward your left, and at the same time as your foible drops, pull your hilt up with hanging blade around your head for a stroke; meanwhile as you pull up your dusack for another cut, then at the same time also pull your rear foot up to the forward right one, so that you have another full step forward with your right foot to go with the cut you have prepared.  
+
* From there, let the foible of your dusack drop and run off toward your left, and at the same time as your foible drops, pull your hilt up with hanging blade around your head for a stroke.
 +
* Simultaneously gather the rear foot up to the forward (right) one.
 +
* Cut as before through the vertical line, yet no further than to the crossing of the lines, into the Longpoint.
 +
* From there, gather to cut as before; and do this one cut to three or four forward.
 +
 
 +
Do this stepping forward, then do it stepping backward. 
 +
 
 +
Repeat this replacing the Oberhauw with:
 +
 
 +
* [[Zornhauw]]
 +
* [[Mittelhauw]]
 +
* [[Unterhauw]]
 +
 
 +
== Cutting Through Drill ==
 +
 
 +
This drill goes all the way through longpoint, down, and around, to cut long powerful cuts and sending the opponents cuts away entirely.
 +
 
 +
* Cut through the vertical line, letting the dussack cut all the way down and turning so the blade passes your left side, and loops back around into the [[Wacht]] guard.
 +
* As the blade comes up into the Watch guard, gather the rear foot up to the lead one.
 +
* Gather forward and cut again through the vertical line.
 +
 
 +
Repeat this several times backward and forward.
  
Cut as before through the vertical line, yet no further than to the crossing of the lines, into the Longpoint.
+
We can do the same for the Zornhauw, Mittelhauw, and Unterhauw, for example with the Unterhauw:
  
From there, gather to cut as before; and do this one cut to three or four forward.  
+
* Starting in Steer
 +
* Step and cut with the long edge from below through the diagonal line through the face from right to left all the way through, turning the hand after the cut is completed so the thumb faces right and the short edge comes to your shoulder.
 +
* Gathering step and pull the hilt around the head, cutting up again from below from the right side.
  
As many cuts as you deliver forward, you shall also execute the same number of cuts and steps backwards again; and as you have drawn the rear foot up to the forward foot in cutting forward, so that you can step further forward with the front foot, likewise when you will step backward in cutting, you must also give ground with the front foot as far back as the rear one, as you pull up to the stroke; and as you have previously stepped forward for the stroke with your right foot, so you must now step back in cutting with your rear left one.
+
Repeat several times backward and forward.

Latest revision as of 07:29, 20 September 2017

This first Drill teaches how to send each of the four cuts through its line; firstly halfway, that is into the Longpoint, secondly all the way through the line, cut after cut from one side.

[edit] Cutting to Longpoint Drill

This shows how you can parry your opponent's cuts into longpoint.

Stand with your left foot forward and hold your dusack in the Steer, as shown below.

DussackStierGuard.jpg
  • Step and cut straight from above down through the vertical line, as far as the Midpoint, so that you're in longpoint (as shown below).
DussackLangort.jpg
  • From there, let the foible of your dusack drop and run off toward your left, and at the same time as your foible drops, pull your hilt up with hanging blade around your head for a stroke.
  • Simultaneously gather the rear foot up to the forward (right) one.
  • Cut as before through the vertical line, yet no further than to the crossing of the lines, into the Longpoint.
  • From there, gather to cut as before; and do this one cut to three or four forward.

Do this stepping forward, then do it stepping backward.

Repeat this replacing the Oberhauw with:

[edit] Cutting Through Drill

This drill goes all the way through longpoint, down, and around, to cut long powerful cuts and sending the opponents cuts away entirely.

  • Cut through the vertical line, letting the dussack cut all the way down and turning so the blade passes your left side, and loops back around into the Wacht guard.
  • As the blade comes up into the Watch guard, gather the rear foot up to the lead one.
  • Gather forward and cut again through the vertical line.

Repeat this several times backward and forward.

We can do the same for the Zornhauw, Mittelhauw, and Unterhauw, for example with the Unterhauw:

  • Starting in Steer
  • Step and cut with the long edge from below through the diagonal line through the face from right to left all the way through, turning the hand after the cut is completed so the thumb faces right and the short edge comes to your shoulder.
  • Gathering step and pull the hilt around the head, cutting up again from below from the right side.

Repeat several times backward and forward.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools